Mostrar el registro sencillo del ítem

dc.contributor.authorNuñez-Ircio, Jon
dc.date2017-04-21
dc.date.accessioned2017-07-12T09:52:53Z
dc.date.available2017-07-12T09:52:53Z
dc.identifier.urihttps://reunir.unir.net/handle/123456789/5124
dc.descriptionThis final master's work (TFM) is based on the use of the 3D printer in the classroom within the subject of Technology for the last cycle of the Compulsory Secondary Education (ESO). To do this, an eminently practical Didactic Unit is developed in which students of the last cycle of ESO, specifically in 4th of ESO, can work in the classroom with 3D printers, due to the increasing relevance of this type of printing in the industrial world, and taking advantage of the 3D printers manufactured in previous years by other students who have completed the Industrial Mechatronics Cycle, in addition to other printers for educational use that the centre will provide. The methodology used is a methodology based on cooperative learning based on challenges, where the students will perform a work in an autonomous way, being themselves the protagonists of their own learning. This learning will be reinforced with visits to 2 industrial companies that are engaged in 3D printing. Finally, it should be noted that although this Didactic Unit has not been able to be carried out in the 4th classrooms of the ESO, the teaching material created will be able to be used by teachers who lack knowledge in 3D printing, but have the initiative to incorporate this new technology into their classes. In this way, it will be possible to study firsthand the interest aroused by this technology among the students in class and see the positive or negative impact it creates in them, and in positive case be improving the Didactic Unit year after year.es_ES
dc.description.abstractEl presente trabajo fin de máster (TFM) se basa en el uso de la impresora 3D en el aula, dentro de la asignatura Tecnología para el último ciclo de Educación Secundaria Obligatoria (ESO). Para ello, se desarrolla una Unidad Didáctica eminentemente práctica, en la que los alumnos/as del último ciclo de ESO, concretamente en 4º de ESO, puedan trabajar en el aula con impresoras 3D, debido a la cada vez mayor relevancia de este tipo de impresión en el mundo industrial, y aprovechando para ello las impresoras 3D fabricadas en años anteriores por otros alumnos/as que han cursado el Ciclo de Mecatrónica Industrial, además de otras impresoras para uso educativo que el centro proporcionará. La metodología utilizada es una metodología basada en el aprendizaje cooperativo mediante retos, donde los alumnos/as realizarán un trabajo de forma autónoma, siendo ellos mismos los protagonistas de su propio aprendizaje. Este aprendizaje se reforzará con visitas a 2 empresas industriales que se dedican a la impresión 3D. Por último, cabe reseñar que aunque la presente Unidad Didáctica no se ha podido llevar a cabo en las aulas de 4º de ESO, el material didáctico creado podrá ser utilizado por aquellos docentes que carezcan de conocimientos en impresión 3D, pero tengan la iniciativa de incorporar esta novedosa tecnología en sus clases. De esta manera, se podrá estudiar de primera mano el interés suscitado por esta tecnología entre los alumnos/as en clase y ver el impacto positivo o negativo que crea en ellos, para en caso positivo ir mejorando la Unidad Didáctica año tras año.es_ES
dc.language.isospaes_ES
dc.rightsopenAccesses_ES
dc.subjectimpresión 3Des_ES
dc.subjectGoogle SketchUpes_ES
dc.subjectaprendizaje cooperativoes_ES
dc.subjecttecnologíaes_ES
dc.subjectaprendizaje autónomoes_ES
dc.subjectMáster Universitario en Formación de Profesorado de Educación Secundaria Especialidad en Tecnología e Informáticaes_ES
dc.titlePropuesta de Unidad Didáctica en Tecnología de 4º Curso de Educación Secundaria Obligatoria: Impresión 3Des_ES
dc.typemasterThesises_ES
reunir.tag~360es_ES


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem