Mostrar el registro sencillo del ítem

dc.contributor.authorEliche-Quesada, D
dc.contributor.authorFelipe Sesé, Manuel Ángel (1)
dc.contributor.authorLópez-Pérez, J A
dc.contributor.authorInfantes-Molina, A
dc.date2017-01
dc.date.accessioned2017-08-09T10:46:19Z
dc.date.available2017-08-09T10:46:19Z
dc.identifier.issn1873-3956
dc.identifier.urihttps://reunir.unir.net/handle/123456789/5371
dc.description.abstractThis study analyzes the feasibility of using biomass combustion ash waste (rice husk or wood ash from boards) as secondary raw materials in the manufacture of clay bricks. The ash was characterized using particle size distribution analysis, chemical composition analysis by X-ray diffraction (XRD) and X-ray fluorescence (XRF), thermal analysis, elemental analysis, and scanning electron microscopy (SEM). Either rice husk ash or wood ash was used to replace different amounts (10-30 wt%) of clay in brick manufacture. Brick samples were formed by compression at 54.5 MPa and fired at temperatures of 900 or 1000 degrees C for 4 h, at a heating rate of 3 degrees C/min. The bricks' properties were compared to conventional products containing only clay and prepared following standard procedures. The bricks' technological properties depended on type and amount of ash used, and firing temperature. The results showed small variations due to firing temperature. Firing at 1000 degrees C achieved greater densification and thus lower water absorption and higher compressive strength firing at 900 degrees C produced higher porosity, which reduced compressive strength. Based on the results, 1000 degrees C was selected as the optimal firing temperature; and 10 wt% rice husk ash and 20 wt% wood ash as the optima amounts of biomass ash waste. Moreover, the bricks containing wood ash showed properties similar to the control bricks containing only clay and improved thermal conductivity. Finally, the bricks containing 10 wt% rice husk ash and 30 wt% wood ash fulfilled standard requirements for clay masonry units.es_ES
dc.language.isoenges_ES
dc.publisherCeramics Internationales_ES
dc.relation.ispartofseries;vol. 43, nº 1
dc.relation.urihttp://www.sciencedirect.com/science/article/pii/S0272884216317163?via%3Dihubes_ES
dc.rightsrestrictedAccesses_ES
dc.subjectrice husk ashes_ES
dc.subjectwood ashes_ES
dc.subjectclay brickses_ES
dc.subjectsustainabilityes_ES
dc.subjecttechnological propertieses_ES
dc.subjectJCRes_ES
dc.subjectScopuses_ES
dc.titleCharacterization and evaluation of rice husk ash and wood ash in sustainable clay matrix brickses_ES
dc.typeArticulo Revista Indexadaes_ES
reunir.tag~ARIes_ES
dc.identifier.doihttp://dx.doi.org/10.1016/j.ceramint.2016.09.181


Ficheros en el ítem

FicherosTamañoFormatoVer

No hay ficheros asociados a este ítem.

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem